Villa Grove, IL

Completed HVAC maintenance on a 2-stage condensing furnace, including component inspection, cleaning, and testing. Identified a gas leak at the copper shut-off valve and quoted a black steel line replacement. Recommended a condensate wet switch.

Identified low boiler pressure at 5 PSI caused by air trapped in the downstairs loop. Checked expansion tank and water supply. Quoted and approved a system drain down and refill to purge trapped air and restore proper operating pressure.

Diagnosed a furnace water circuit error caused by a loose molex connection at the top-right water sensor. Tightened the 2-pin molex connectors to restore proper continuity and verified stable system operation.

Replaced water-damaged circuit board, igniter, flame sensor, and thermostat to resolve furnace heating issues. Verified proper two-stage heating operation and educated homeowner on new thermostat controls.

Cleaned furnace burners and igniters, inspected wiring connections, verified delta T, and flushed the condensate drain line during routine furnace maintenance. Heating system is in good condition with no issues found.

Inspected electrical components, removed and cleaned burners, and verified gas pressure, static pressure, and temperature rise to ensure safe and efficient heating system operation.

Resolved a sewer backup by excavating to access the clay line. Rodded towards the house and city main to clear roots and sludge. Camera inspection verified drainage and identified a slipping pipe joint under the street.

Resolved boiler circulation issue. Installed new boiler drains, flushed black water buildup from the system for 20 minutes, and purged trapped air to restore proper heat flow and system operation.

Resolved an AC not cooling issue by replacing a failed capacitor on the outdoor unit, restoring efficient cooling and system performance to the home.

Corrected incorrect AC system settings and wiring configurations during an AC service to restore proper cooling performance and system efficiency.

Cleaned boiler burner assembly, verified expansion tank, and checked operating pressure. Diagnosed trapped air in bedroom radiators lacking bleed valves; scheduled follow-up heating and cooling service to bleed system from the boiler drain.

Replaced a leaking furnace gas valve with an Ameren-provided part. Tested the gas line for leaks, tightened a loose stove gas valve to temporarily secure it, and provided a replacement quote.

Replaced a failed capacitor and condenser fan motor to resolve an AC not cooling issue. Restored proper airflow and cooling efficiency to the air conditioner.

Resolved a clogged downspout drain by rodding 50 feet from the open discharge and 15 feet from a corrugated tee with a 3/4" cable and cutter. Cleared heavy root intrusion and verified restored flow via water test and camera inspection.

Conducted follow-up inspection on new heating and cooling system. Verified 80k furnace gas pressure (3.5 inWC) and temperature rise. Tested 3-ton AC pressures, superheat (6), and subcooling (4) to ensure proper airflow and HVAC maintenance.

Replaced 16x20x4 filter, cleaned outdoor AC coil, and tested electrical systems. Flushed water heater, checked water pressure, and conducted leak detection in crawl space and toilets for optimal HVAC and plumbing performance.

Installed a new energy-efficient HVAC system, replacing the old heating and cooling units to restore reliable home comfort and airflow.

Replaced air filter and washed condenser unit during AC maintenance. Secured wire connections, and tested the capacitor and contactor to ensure reliable operation. Confirmed efficient cooling performance with an optimal Delta T reading.

Flushed tankless water heater with vinegar and checked intake screens. Diagnosed a clogged kitchen faucet hot side that restricted flow and prevented the heater from firing. Recommended faucet replacement and provided an installation quote.

Replaced two 14x20x1 air filters, cleaned the outdoor unit, and tested airflow and refrigerant for HVAC maintenance. Inspected residential plumbing by dye testing toilets for leaks and verifying water pressure.

Inspected plumbing, verified water pressure, and quoted a corroded water heater valve replacement. Replaced the furnace filter, cleaned outdoor AC coils, and recommended a follow-up to check low refrigerant levels.

Cleared a plugged condensate drain line and trap using negative and positive pressure to resolve the water leak. Flushed the drain pan to ensure proper flow and verified the system has a correct refrigerant charge for optimal cooling.

Inspected water heater following a CO alarm. Cleaned heavy lint and dust from the burner and chamber, verified proper vent draft, and tested with a CO detector to ensure safe, optimal operation.

Replaced the blower motor and run capacitor. Expanded the return grill and cleaned the secondary heat exchanger to resolve poor airflow. Air conditioner repair successfully restored proper cooling and heat removal.

Replaced a failed capacitor and washed the condensing coil to resolve an AC not cooling issue. This air conditioner repair restored proper system operation and improved cooling efficiency.